1. Frequently check whether the temperature of the reducer, coupling, motor and all rollers are normal, and handle the abnormalities in time.

2. If the conveyor belt slips on the transmission drum, find out the reason and adjust it in time.

3. Frequently check the belt joints, and find the local damage, timely repair or replace the plate conveyor joints.

4. The rollers should be inspected regularly. During the inspection, proper amount of grease must be added to the seal ring. The rollers that are not flexible should be replaced immediately.

5. The rotating parts of the belt conveyor must be well lubricated by the slat conveyor, and the lubricated parts should be regularly filled with oil and replaced with oil in strict accordance with the requirements of use.

6. When troubleshooting, the power should be cut off and processed, and live work is strictly prohibited.

7. When the conveyor is working, it is not allowed to overhaul or step on the conveyor belt of the scraper.

8. It should be ensured that the cleaner has a good working condition. If the component is damaged, it should be replaced in time.

9. Before each shift, you must check the hydraulic conveyor coupling for oil leakage, whether the fusible plug is qualified, and check the oil charge of the hydraulic coupling of the chain plate conveyor. If you find that the amount of oil is insufficient, follow the regulations in time. supplement.

10. Frequently check the tension of the conveyor belt and find that the slack phenomenon should be tightened in time. The MS-type buried scraper conveyor should be tensioned in time. After tensioning, pay attention to observe whether the belt deviates and adjust in time.