Mob/Whatsapp/Wechat: +86 186 1063 3171
Email: [email protected]
Add: 7th Floor, JianYe Senlin Bandao#39, Luohe, Henan, China.
Main characteristics of overall wear
The radial wear degree of the concrete piston lip part of the concrete pump fittings is basically the same, and the wear marks are relatively uniform.
The overall wear failure reasons
Improper maintenance, poor lubrication, excessive load, quality problems of concrete piston of concrete pump accessories, such as excessive size or poor wear resistance of materials.
Troubleshooting of overall wear and tear
1. Through the identification of wear marks, it is confirmed that the overall wear of the concrete piston of the concrete pump accessories;
2. Check the washing room and cooling water to ensure that the washing room is clean;
3. Remove the dustproof ring, improve the lubrication and cooling of the concrete piston of the concrete pump accessories, add an appropriate amount of hydraulic oil for the concrete pump accessories into the washing room, and replace the new guide ring to improve the lubrication;
4. Check the size of the concrete piston of the concrete pump fittings. Usually, the lip of the concrete piston of the concrete pump fittings should be 4-5 mm larger than the diameter of the conveying cylinder;
5. Replace the concrete piston of other materials of the concrete pump accessories.
Mob/Whatsapp/Wechat: +86 186 1063 3171
Email: [email protected]
Add: 7th Floor, JianYe Senlin Bandao#39, Luohe, Henan, China.
Please fill in your mailbox information